Auto mode settings (auto mode), Crepeating a recorded monitoring process (tour) – Sanyo VCC-MC600P User Manual
Page 37
Auto Mode Settings (AUTO MODE)
36
You can repeat a monitoring process by recording an image
track of all camera pan, tilt and zoom operations. You can create
up to four image tracks.
1
Use the joystick lever (xy) to select [TOUR], use the
lever (vw) to select a number assigned to image
track (1 - 4), and press the [ENTER] button.
The TOUR screen appears.
2
Use the joystick lever (xy) to select [TRACE] –
“SET y”, and press the [ENTER] button.
“OK?” appears under “SET y”.
3
Use the joystick lever (xy) to select “OK?”, and
press the [ENTER] button.
The TOUR SETTING screen appears.
4
Record an image track or operation commands.
Performing any operation starts recording.
Every camera operation including panning, tilting and
command operation will be recorded in sequence as tour
memory.
Recordable operations/commands:
panning, tilting, move to preset position (PRESET GO),
zooming, one-push auto focus
Memo: The used amount of tour memory is displayed in the screen.
The memory usage display starts from “0/100” and ends at
“100/100” representing the memory is full.
5
After the operations to be recorded complete, press
the [ENTER] button.
The operations performed are recorded as tour memory, and
the TOUR screen appears again.
If the memory becomes full, the recording stops automatically
at that moment.
6
Use the joystick lever (xy) to select [RUN] – “SET
y
”, and press the [ENTER] button.
The on-screen menu disappears, and the operation recorded
in the tour memory will be repeated.
Pressing the [ENTER] button stops the operation.
Memo: While monitoring in the normal screen, the Auto mode is
turned on or off in the main screen of the system controller.
For details, refer to the system controller instruction manual.
C
Repeating a recorded monitoring
process (TOUR)
AUTO MODE
SEQUENCE
y
AUTO PAN
y
TOUR
y
AUTO RETURN
TIME
PRESET
MENU
A
1
1
SEQ A
1M
OFF
BACK
TOUR 1
TRACE
y
RUN
y
MENU
SET
SET
BACK
y
TOUR 1
TRACE
RUN
MENU
ON
OK?
1
BACK
y
REC
TOUR SETTING
TOUR SETTING
TOUR SETTING
100/100
The amount of tour
memory used
y
y
TOUR 1
TRACE
RUN
MENU
SET
SET
BACK
L5BU2_XE(VCC-MC600P_MC500P)(GB).book 36 ページ ２００７年１月１８日 木曜日 午前９時４４分