Sanyo VCC-MC600P User Manual

Page 6

Advertising
background image

5

Basic Operations for Performing Settings in
the Menu

To perform settings in the menu, use the joystick lever (1) on the system controller and the [ENTER] button (2) in the CAMERA MENU
CONTROL screen.

• Joystick lever:

Used to move the cursor or select menu options.

Instead of the joystick lever, the control buttons shown in (3) in
the CAMERA MENU CONTROL screen can be used to move the
cursor or select menu options.

• [ENTER] button:

Used to confirm your selection or execute operation commands.

Memo: Some settings in the menu can be performed by using the

sub screen on the system controller. For details, refer to the
system controller instruction manual.

To select the menu to perform settings

Use the joystick lever (xy) to move the cursor highlighting the menu
item up or down. Move the cursor to your desired menu item using
the lever.

To display an advanced setting screen for the

selected menu

The menu item shown with y mark has an advanced setting screen.
After selecting the menu item with y mark, press the [ENTER] button
to display the advanced setting screen.

To select an option for the setting item

Use the joystick lever (vw) to display the available options in turn.

To go back to a previous setting screen

Move the cursor to “MENU” and select the “BACK” option, then press
the [ENTER] button.

To exit from the menu screen

Move the cursor to “MENU” and select the “END” option, then press
the [ENTER] button.

Memo: If there is no menu operation for three minutes or more, the

menu screen is automatically exited.

To display the menu screen again

Press the [MENU] button in the CAMERA MENU CONTROL screen.

To restore your selected options to initial values

Move the cursor to “PRESET” and change its option to “ON”, then
press the [ENTER] button.

Memo: The following settings cannot be restored.

• Privacy mask
• Preset position
• Camera view
• Camera title
• Password

In this manual, xy represent vertical joystick lever operation
and vw represent horizontal joystick lever operation.

MENU

ENTER

esc

C A M E R A M E N U C O N T R O L

C A M E R A M E N U C O N T R O L

E s c t o e x

E s c t o e x i t C A M 2 D V R 1

t C A M 2 D V R 1

1

2

3

<CAMERA MENU
CONTROL screen>

CAMERA
LENS
PAN/TILT
AUTO MODE
ALARM
PRIVACY MASK
PASSWORD
LANGUAGE
OPTION

PRESET
MENU

SET
SET
SET
SET
SET
SET
SET
SET
SET

OFF
BACK

y
y
y
y
y
y
y
y
y

Cursor

SYNC
IRIS

y

WHITE BALANCE

y

BLC
SHUTTER
APERTURE

y

AGC

y

CAMERA

y

LENS

y

PAN/TILT

y

AUTO MODE

y

ALARM

y

PRIVACY MASK

y

PASSWORD

y

SET
SET
SET
SET
SET
SET
SET

INT
AUTO
ATW
OFF
OFF
ON
ON

SYNC

y

IRIS

y

WHITE BALANCE

y

BLC
SHUTTER
APERTURE

y

AGC

y

SYNC
IRIS

y

WHITE BALANCE

y

BLC
SHUTTER
APERTURE

y

AGC

y

INT
AUTO
ATW
OFF
OFF
ON
ON

L-L
AUTO
ATW
OFF
OFF
ON
ON

PRESET
MENU

OFF
BACK

PRESET
MENU

OFF
END

PRESET
MENU

ON
BACK

L5BU2_XE(VCC-MC600P_MC500P)(GB).book 5 ページ 2007年1月18日 木曜日 午前9時44分

Advertising
This manual is related to the following products: