Password settings (password), 46 b changing the password – Sanyo VCC-MC600P User Manual
Page 47
Password Settings (PASSWORD)
46
b Changing the password
1
Use the joystick lever (xy) to select [PASSWORD] –
“SET y”, and press the [ENTER] button.
The PASSWORD screen appears.
2
Use the joystick lever (xy) to select [PASSWORD
CHANGE] – “SET y”, and press the [ENTER]
button.
The screen for changing the password appears.
3
Use the joystick lever to enter current password
into the NOW PASSWORD field, and press [ENTER].
If the password currently used is authenticated, the NEW
PASSWORD field appears.
4
Use the joystick lever to enter new password into
the NEW PASSWORD field, and press [ENTER].
“OK” appears under the NEW PASSWORD field and the new
password is set.
☞
After completing setting, use the lever to move the cursor to
[MENU] and select “BACK” or “END”.
PASSWORD
<NOW PASSWORD>
****
y
MENU
SET
BACK
<NEW PASSWORD>
****
y
MENU
PASSWORD
MENU
SET
BACK
L5BU2_XE(VCC-MC600P_MC500P)(GB).book 46 ページ ２００７年１月１８日 木曜日 午前９時４４分