Sennheiser CONFERENCE SYSTEM SDC 8000 - Manual (Page 81)

Configuring the SDC 8000 system
81
Adjusting the audio settings for the consoles’ microphones
Via the “ Micro ” menu item, you can adjust the audio settings (automatic
gain reduction, bass, middle and treble response) for the consoles’
microphones.
If several participants speak simultaneously, feedback and loud hissing
can occur. In order to prevent feedback, you can activate the automatic
gain reduction. This function reduces the gain per active microphone by
the selected level and thus prevents feedback.
̈
From the central unit’s operating menu, choose “ Conference ”,
“ Micro ” and “ Aut. Gain Red. ”.
The current setting for the gain reduction is shown on the display.
̈ Enter the desired gain reduction and press the ENTER key to save your
setting.
To change the bass response:
̈
From the central unit’s operating menu, choose “ Conference ”,
“ Micro ” and “ Low ” one after the other.
The current setting for the bass response is shown on the display.
̈
Change the value and press the ENTER key to save your setting.
To change the middle response:
̈
From the central unit’s operating menu, choose “ Conference ”,
“ Micro ” and “ Middle ” one after the other.
The current setting for the middle response is shown on the display.
̈ Change the value and press the ENTER key to save your setting.
To change the treble response:
̈
From the central unit’s operating menu, choose “ Conference ”,
“ Micro ” and “ Treble ” one after the other.
The current setting for the treble response is shown on the display.
̈
Change the value and press the ENTER key to save your setting.
Resetting the conference system
To reset the conference system:
̈ From the central unit’s operating menu, choose “ Conference ” and
“ Reset ” one after the other.
̈
Press the ENTER key.
The conference system is reset.
Note!
Resetting the conference system has no effect on the interpretation
system.
Conference
5 Micro
Micro
1 Aut. Gain Red.
Micro
2 Low
Micro
3 Middle
Micro
4 Treble
Conference
6 Reset