Sennheiser CONFERENCE SYSTEM SDC 8000 - Manual (Page 91)

Configuring the SDC 8000 system
91
̈
Press the RELAY 1 key
Ƽ
of the desired interpreter console and keep it
pressed.
̈
While keeping the RELAY 1 key pressed, press the “MENU
̆
” or
“MENU ̄ ” menu selection key ƿ until the desired booth number
(BOOTH) is shown on the display.
̈
Press the MICRO key
ƺ
to transmit the selected booth number to the
central unit.
Note!
If an error occurs during initialization, the text “ Init Refused ” is
shown on the displays of the interpreter consoles. In this case, re-
initialize the interpreter consoles.
̈
If all booth and desk numbers are assigned correctly, press the ENTER
key on the central unit to save this configuration.
The displays of the interpreter consoles show the languages assigned
to the A-channel and the B-channel and other related information (see
example illustration on the left).
The interpreter consoles are now ready for operation.
Note!
The max. number of interpreter consoles per booth has to be
configured via the central unit (see “Setting the max. number of
interpreter consoles per booth” on page 86 and “Half-automatically
initializing all interpreter consoles on the central unit” on page 90).
Manually assigning an interpreter console an individual desk number
(interpreter console number)
To manually assign an interpreter console an individual desk number
(
DESK ):
̈
From the central unit’s operating menu, choose “ Interpretation ”,
“ Initialize Units ” and “ Full Init ” one after the other.
̈
Press the RELAY 3 key
Ƽ
of the desired interpreter console and keep it
pressed.
̈
While keeping the RELAY 3 key pressed, press the “MENU
̆
” or
“MENU ̄ ” menu selection key ƿ until the desired desk number is
shown on the display.
Ƽ
ƿ
Press Mic to confirm
BOOTH DESK
02 01
Full Init
Press ENTER to save
01 ENG
02 ARA
00 00 00 00
FLO FLO FLO FLO
Initialize Units
1 Full Init
Ƽ
ƿ
Press Mic to confirm
BOOTH DESK
01 02