Sennheiser CONFERENCE SYSTEM SDC 8000 - Manual (Page 89)

Configuring the SDC 8000 system
89
̈
Choose “ B-channel ” and press the ENTER key.
A booth number is shown on the display.
̈
Choose the number of the booth whose main target language
corresponds to the language you want to configure for the B-channel.
Example:
Let us assume that there are three interpreter booth:
y Booth 1 for the target language English
y Booth 2 for the target language French
y Booth 3 for the target language German
In order to set the B-channel of booth 3 to English, choose “ 1 ” from the
“ B-channel ” menu.
Enabling the auto-relay interpretation function (Auto-floor)
If the original floor language is a language of which all interpreters have a
complete understanding and from which they work, you
do not have to
enable this function. In this case, all interpreters interpret the original floor
language into their respective target languages. These interpretations are
then fed to the corresponding interpretation channels.
If the original floor language is not a language of which all interpreters
have a complete understanding and from which they work, you can enable
the auto-relay interpretation function (auto-floor): The original floor
language is interpreted into a language understood by all interpreters.
This interpretation is automatically “relayed” to the floor channel of all
other interpreters and serves as the basis from which they interpret into
their respective target languages.
To enable the auto-relay interpretation function (auto-floor):
Attention!
The interpreter who delivers the relay interpretation has to choose the
B-channel !
̈
From the central unit’s operating menu, choose “ Interpretation ”,
“ Configuration ” and “ Select Booth ” one after the other.
The current booth number is shown on the display.
̈ Choose the number of the booth from which the relay interpretation is
to be delivered and press the ENTER key.
̈ Choose “ Auto-floor ” and press the ENTER key.
̈ Choose “ Yes ” to enable the auto-floor function and press the ENTER
key to save this configuration.
The relay interpretation is automatically “relayed” to the floor channel
of all other interpreter consoles and the AUTOFLOOR LED
on these
interpreter consoles lights up, indicating that the auto-floor function is
enabled.
Booth Configuration
2 B-channel
Booth Configuration
3 Auto-floor
1. Booth Configuration
Auto-floor = Yes
Press ENTER to Save
©