Sennheiser CONFERENCE SYSTEM SDC 8000 - Manual (Page 88)

Configuring the SDC 8000 system
88
Configuring the language options for the interpreter booths
The “ Configuration ” menu item on the “ Interpretation ” menu
allows you to configure the language options for the interpreter booths:
y the main target language (A-channel)
y the second target language (B-channel)
y the auto-relay interpretation for the interpreters (auto-floor)
̈
After having configured the language options as described in the
following sections, press the EXIT key to get to the display shown on
the left.
̈ Press the ENTER key to save your configuration and to exit the “ Booth
Configuration ” menu.
Configuring the main target language (A-channel) of a booth
To configure the main target language of a booth:
̈ From the central unit’s operating menu, choose “ Interpretation ”,
“ Configuration ” and “ Select Booth ” one after the other.
The current booth number is shown on the display.
̈
Choose the number of the booth whose main target language (A-
channel) you want to configure and press the ENTER key.
̈
Choose “ Language ” and press the ENTER key.
The current main target language is shown on the display.
̈
Choose the desired main target language and press the ENTER key to
save your setting.
The configuration of the main target language of a booth
cannot be
changed on the interpreter consoles!
Example:
Let us assume that the active languages at a conference are English,
German and French. You then have to configure e.g. an “English” booth
by choosing “English” as the main target language for this booth.
Configuring the second target language (B-channel) of a booth
An interpreter may work into several target languages. In order that the
interpreter is able to interpret into a second language, the B-channel has
to be configured to this language.
Note!
The second target language must already be configured as the main
target language of another booth!
The B-channel can be configured either via the interpreter console – even
during a conference – (see “Configuring the B-channel of an interpreter
console” on page 33) or via the central unit’s operating menu:
̈
From the central unit’s operating menu, choose “ Interpretation ”,
“ Configuration ” and “ Select booth ” one after the other.
The current booth number is shown on the display.
̈ Choose the number of the booth whose second target language (B-
channel) you want to configure and press the ENTER key.
Interpretation
1 Configuration
Save Config.?
Yes
Press ENTER to Save
Booth Configuration
1 Language