Starbucks Barista SUP021 YDR User Manual

Page 11

Advertising
background image

ENGLISH

• 11 •

Questions? Call us at 1.800.334.5553

4 INSTALLING THE ESPRESSO

MACHINE

For your safety and the safety of third
parties, follow the “Safety Standards”
(see Chapter 3).

4.1 Packaging

The original packaging was designed and made
to protect the appliance during shipment.
We recommend you keep it for future needs.

4.2 Getting Started

• Remove the espresso machine from the

packaging and position it in a suitable
location that meets the requirements spe-
cified and described in the safety standards
(Chapter 3).

• Make sure that the drip tray (Fig. 01, pos. 13),

the coffee grounds drawer (11) and the brew
unit (18) are fitted correctly and the front cover
(16) is closed.

• Keep the cleaning brush (21) and the brew

unit key (20) near the appliance.

4.3 Preparing the Starbucks Barista

Digital Italia for use

• Open the water tank cover and remove

the tank (Fig. 02) using the built-in handle.
Rinse and fill the tank with fresh, cold water
(Fig. 03); we recommend that you do not
exceed the MAX level mark.

Replace the water tank in its housing

(Fig. 04) and reposition the cover on its ori-
ginal position.

Always fill the tank (10) with fresh, cold
water. Hot water and other liquids can

damage the tank and/or the appliance. Do
not operate the appliance without water.
Make sure that there is enough water inside
the tank.

• Lift the coffee bean container cover (Fig.05).

• Pour whole bean coffee into the container

(Fig. 06).

Use whole bean coffee only. Ground
and instant coffee, as well as other

items, cause damage to the appliance.
Note: this machine is designed for use with
Starbucks

®

Coffee.

• Close the container cover.

• Insert the plug into a suitable wall outlet after

making sure that the ON/OFF switch (8) is in
the OFF position.

• When not in use, keep the ON/OFF switch of

the appliance in the OFF position. To switch
ON the espresso machine, simply press the
switch (Fig. 07) located on the back of the
machine.

4.4 Priming the Pump

• To prime the pump, direct the steam wand

(Fig. 01, item 15) toward the drip tray or place
a cup under the steam wand.

• Turn the knob counterclockwise (Fig. 08).

Wait for water to flow regularly from the
steam wand. Shut off the flow by turning the
steam knob clockwise.

Note: You must prime the pump of
the espresso machine if the machi-

ne is switched ON for the first time, the
machine has not been used for a long
time, the water tank has been emptied
completely or if indicated on the digital
display.

• When the display shows SELECT SHOT

SIZE/READY FOR USE the Starbucks Barista

Digital Italia is ready for use.

Advertising