Starbucks Barista SUP021 YDR - Manual (Page 15)

ENGLISH
• 15 • Questions? Call us at 1.800.334.5553
15)
TEMPERATURE *
PRE-BREWING
Press the MENU/OK button to go into the
different TEMPERATURE settings. You are
now ready to program the temperature for
brewing. There are 5 choices: maximum -
high - medium - low - minimum.
Move the cursor up or down to make your
choice of temperature. Once you have
selected the temperature you must confirm
it by pressing the MENU/OK button.
Now if you move the CURSOR v DOWN
button, you will be ready to program the
PRE-BREWING function.
16)
PRE-BREWING *
PRE-GRINDING
Program the PRE-BREWING function to ON,
LONG or OFF. Press the MENU/OK button
to go into the PRE-BREWING function.
Then move the cursor up or down to make
the choice and confirm with the MENU/OK
button. Go to the next function by moving
the cursor down. The next function is PRE-
GRINDING.
17)
PRE-GRINDING *
TOTAL BREWED
Press the MENU/OK button to go into the
PRE-GRINDING feature.
Program the PRE-GRINDING function ON
or OFF. Move the cursor up or down to
make the choice and then confirm with
the “MENU/OK” button. Go to the next
function by moving the cursor down. The
next function is TOTAL BREWED.
18)
TOTAL BREWED *
TIMER
There is no need to program this display.
TOTAL BREWED is a counter that tells you
how many shots have been brewed. Just
press the MENU/OK button to see the
total number. Now move the cursor down.
The next function to program will be the
TIMER.
19)
TIMER *
CLOCK
Now program the timer. Press the MENU/OK
button and the display will read STANDBY
AFTER. Simply move the cursor up or down
to program the standby function of the timer
from 15 minutes to 3 hours. Confirm the
standby time with the MENU/OK button
and then move the cursor again to the next
function, CLOCK.
20)
CLOCK *
DEFAULT SETTINGS
You must select whether you would like this
function ON or OFF. Move the cursor up or
down and then press MENU/OK to confirm.
The display will read: CLOCK/CLOCK TIME.
21)
CLOCK
CLOCK TIME
The CLOCK function is used for setting the
start-up time ON. To access the menu press
the MENU/OK key and select by moving the
cursor up or down. To confirm your selection
press the MENU/OK key again.
When you activate this function you
automatically deactivate the TIMER function.
(On the display #23 ON/OFF Time) we will
explain how to select and set the time ON and
OFF. Go now to the next function #22.
22
CLOCK TIME
ON/OFF TIME
The CLOCK TIME function is used to set the
actual time that will be displayed when the
machine is switched to ON.
This is a very important function because it
will make the previous function (21 CLOCK)
work correctly and obey the timings that
you have set for the machine to turn ON
and OFF. To access the menu press the
MENU/OK key and select the correct time
with the cursor keys. Then press MENU/OK
to confirm hours and proceed to program
the minutes. To confirm the selected minutes
press MENU/OK.