Sharp AL-2030 - Manual (Page 11)

9
2
2 Remove all pieces of tape shown in the illustration below. Then
open the SPF and remove protective materials. After that, take
out the bag containing the TD cartridge.
3 Release the scan head locking switch.
The scan head locking switch is under the document glass.
If the switch is locked (
) , the unit will not operate. Unlock the switch ( )
as shown below.
To lock the scan head locking switch, hold up the catch in illustration and
turn the center knob counter-clockwise 90 degrees until you hear a click.
AL-2030
AL-2040CS
Lock Unlock
Grasp here and turn in
the direction of the arrow.
A
A
AL-2030_2040CS.book 9 ページ ２００７年４月６日 金曜日 午前１１時３２分