Sharp AL-2030 - Manual (Page 19)

17
3
BYPASS FEED (including special paper)
The multi-bypass tray can be used to feed standard paper, transparency film, labels,
envelopes, and other special purpose paper. Paper measuring from 3-1/2" x 5-1/2"
to 8-1/2" x 14" and in the weight range of 14 lbs. to 34.5 lbs. (52g/m
2
to 128g/m
2
) can
be used in this tray. (For paper weighing from 28 lbs. to 34.5 lbs. (105g/m
2
to
128g/m
2
), 8-1/2" x 11" is the maximum size.)
The multi-bypass tray
1 Open the multi-bypass tray and extend the tray.
• The multi-bypass tray can hold maximum of 50 sheets of paper.
(Capacity will vary depending on the type of paper loaded.)
• The original image must be smaller than the paper or media for
copying. If the original image is bigger than the paper or media, this
may cause smudges on the edges of the copies.
To close the multi-bypass tray, perform step and then step
in the illustration and push the round projections at the right
of the tray until they click.
1
2
AL-2030_2040CS.book 17 ページ ２００７年４月６日 金曜日 午前１１時３２分