Sharp AL-2030 - Manual (Page 72)

70
*1 When standard 8-1/2" x 11" (A4) paper is used under the operating conditions.
*2 Feed paper lengthwise only.
*3 Leading and trailing edges.
*4 Along the other edges in totals.
*5 When making multiple duplex copies, the copy speed will vary based on the environment conditions.
*6 Print speed during printing of the second sheet and following sheets when using 8-1/2" x 11"
(A4) plain paper in the tray 1 and performing continuous one-sided printing of the same page.
*7 The first-copy time is measured after the power save indicator turns off following power on,
using the document glass with the polygon rotating in the copy ready state and "Selection of
copy start state" set to ON in the user programs (8-1/2" x 11" (A4), paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and ambient
conditions such as temperature.
*8 Not including TD and drum cartridges.
Bit depth 1 bit or 8 bit/pixel
Sensor Color CCD
Scanning speed Max. 2.88ms/line
Memory 8 MB 16 MB
Power supply 120V, 60Hz, 8.0A
Power consumption Max. 1.0kW
Overall
dimensions Width 31-9/16" (802mm) 31-9/16" (802mm)
Depth 17-33/64" (445mm) 17-33/64" (445mm)
Weight
(Approximately) *
8
37.04 lbs. (16.8kg) 44.97 lbs. (20.4kg)
Unit
dimensions
Width 20-25/64" (518mm) 20-25/64" (518mm)
Depth 17-33/64" (445mm) 17-33/64" (445mm)
Height 14-3/32" (358mm) 17-33/64" (445mm)
Operating conditions
Temperature: 50°F to 86°F (10°C to 30°C)
Humidity: 20% to 85%
Emulation SHARP GDI
Interface port
USB interface (USB 2.0 Full
Speed) USB interface (USB 2.0 Full
Speed) / LAN interface (10 Base-T)
Noise level
Sound power level LwA
Copying mode: 6.2B
Standby mode: 3.2B
Sound pressure level LpA (reference) (Bystander positions)
Copying mode: 48dB(A)
Standby mode: 16dB(A)
Sound pressure level LpA (reference) (Operator position)
Copying mode: 52dB(A)
Standby mode: 16dB(A)
Noise emission measurement in accordance with ISO7779.
Emission concentration
(measurement according
to RAL-UZ 62: Edition
Jan. 2002)
Ozone:0.02 mg/m
3
or less
Dust:0.075 mg/m
3
or less
Styrene:0.07 mg/m
3
or less
As a part of our policy of continuous improvement, SHARP reserves the
right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from
these values in individual units.
AL-2030 AL-2040CS
AL-2030_2040CS.book 70 ページ ２００７年４月６日 金曜日 午前１１時３２分