Southbend CG/22SC - Manual (Page 25)

EZ C
OM
C
OMBINATION
O
VEN
C
LEANING
O PERATOR ’ S M ANUAL 1182851 REV 2 P AGE 25
CLEANING
PERIODIC CLEANING
• If lime or mineral deposit starts to build up in the interior, clean the unit by using Southbend “descaler” or
other non-caustic deliming solution. Follow manufacturer’s recommended procedures. Thoroughly rinse
out unit with clean water.
• To remove normal dirt, grease, or product residue from stainless steel, use ordinary soap and water
applied with a sponge or cloth. Dry thoroughly with a clean cloth. Never use vinegar or any corrosive
cleaner.
• To remove grease and food splatter or condensed vapors that have baked on the equipment, apply
cleanser to a damp cloth or sponge and rub cleanser on the metal in the direction of the polishing lines
on the metal. Rubbing cleanser as gently as possible in the direction of the polished lines will not mar the
finish of the stainless steel. NEVER RUB WITH A CIRCULAR MOTION. Soil and burnt deposits which
do not respond to the above procedure can usually be removed by rubbing the surface with SCOTCH-
BRITE scouring pads. DO NOT USE ORDINARY STEEL WOOL, as any particles left on the surface will
rust and further spoil the appearance of the finish. NEVER USE A WIRE RUSH, STEEL SCOURING
PAD, SCRAPER, FILE OR OTHER STEEL TOOLS. Surfaces which are marred collect dirt more rapidly
and become more difficult to clean. Marring also increases the possibility of corrosive attack. Refinishing
may then be required.
SEMIANNUAL CLEANING
At least twice a year, have your Southbend Authorized Service Agency or another qualified service
technician clean and adjust the unit for maximum performance.
Consult the Southbend Authorized Parts/Service Distributor list for the Authorized Service Representative in
your area.