Appendix d system specifi cations – SUPER MICRO Computer 6015B-Ni User Manual

Page 119

Advertising
background image

D-1

Appendix D: System Specifi cations

Appendix D

System Specifi cations

Processors

Single or dual Intel® Xeon 5300/5100/5000 Sequence processors at a front

side (system) bus speed of 1333/1066/667 MHz.

Note: Please refer to our web site for a complete listing of supported processors.

Chipset

Intel 5000P/ESB2 chipset

BIOS

8 Mb Phoenix® Flash ROM

Memory Capacity

Eight 240-pin DIMM sockets supporting up to 32 GB of ECC FBD DDR2-667/533

SDRAM.

See the memory section in Chapter 5 for details.

SATA Controller

Intel ESB2 on-chip controller for six-port Serial ATA (RAID 0, 1 5 and 10

supported)

Peripheral Drive Bays

Three (3) 3.5 x 1" drive bays

Expansion Slots

(see page 5-9 for details)

Right side: one PCI-X 133 card or one PCI-E x8 card

Left side: two PCI-E x8 cards

Serverboard

X7DBU (Extended ATX form factor)

Dimensions: 12 x 13.05 in (305 x 331 mm)

Chassis

SC812L-520U Form Factor: 1U rackmount

Dimensions: (WxHxD) 16.8 x 1.7 x 25.6 in. (427 x 43 x 650 mm)

Advertising