SUPER MICRO Computer 6015B-Ni - Manual (Page 55)

Chapter 5: Advanced Serverboard Setup
5-21
5-10 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
Gigabit LAN port, one LED indicates
activity when blinking while the other
LED may be green, amber or off to
indicate the speed of the connection.
See the table on the right for the func-
tions associated with the connection
speed LED.
LAN LED
Connection Speed Indicator
LED Color Defi nition
Off 10 MHz
Green 100 MHz
Amber 1 GHz
LE1
The LE1 LED located near JD1 is the
power LED. LE1 illuminates when
the serverboard is powered up and
operating.
LE2
The LE2 LED located under SW1 is
the UID indicator LED. LE2 illumi-
nates when UID is initiated either by
the UID button or via IPMI. If initiated
a second time, LE2 will turn off.
When the LED blinks blue it means
the signal was initiated via IPMI. If
blue continuously it means the UID
button initiated it.