Samsung SCC-3000 - Manual (Page 15)

《15》
● The menu may be different depending on the PTZ camera model.
● Press the ESC button to move to an upper setup mode.
INFORMATION
PTZ Mode
(1) PTZ Setup Mode
■ This menu is for setting up the PTZ camera function.
It is impossible to operate Speed Dome and DVR by sub-controllers
when the master controller is set to on.
① At the initial screen, press the Function button and press the 0 button
to activate the [SETUP SYSTEM] menu.
② Press the 1 button to activate the [PTZ SETUP 1 ▶] menu.
③ Press the ▶▶ button to activate the [◀ PTZ SETUP 2] menu.
SETUP SYSTEM
1:PTZ 2:DVR
3:CONTROLLER
Press Numeric Key
PTZ SETUP 1
1:PRESET 2:SWING
3:GROUP 4:TOUR
Press Numeric Key
PTZ SETUP 2
1:MODEL 2:TRACE
3:AF
Press Numeric Key
Models supported Models supported Menu Menu
TOUR SPD series - -
PRESET
SPD series, PELCO-D, PANASONIC,
SAMSUNG ELECTRONICS
MODEL
SPD series, PELCO-D, PANASONIC,
SAMSUNG ELECTRONICS
SWING SPD series TRACE
SPD series, PELCO-D,
PANASONIC
GROUP SPD series AF
SPD series, PELCO-D, PANASONIC,
SAMSUNG ELECTRONICS