Samsung SCC-3000 - Manual (Page 31)

《31》
Controller Mode
(6) PASSWORD
■ This menu is for setting the password to enter when changing controller setup values upon power-on.
(6-1) PASSWORD Setup
① At the [Controller SETUP 1▶] menu, press the ▶▶ button (see p.26).
② Press the 2 button to activate the Password Setup screen.
③ Press the 1 button to activate the Password Setup screen.
④ Use the number pad to enter a 6-digit password.
⑤ The password verification screen will appear.
Re-enter the same password. The password will be saved.
▤ The factory default password is ****.
Please change the password after installation.
CONTROLLER SETUP2
1:RESPONSE
2:PASSWORD
Press Numeric Key
PASSWORD SETUP
1:PASSWORD SETUP
2:MENU ON 3:POWER ON
Press Numeric Key
PASSWORD SETUP
INPUT PASSWORD
[ ]
Press Numeric Key
PASSWORD SETUP
RE-INPUT PASSWORD
[ ]
Press Numeric Key