Samsung SCC-3000 - Manual (Page 21)

《21》
PTZ Mode
(6) MODEL
■ This menu is for setting the PTZ camera ID and camera type.
① At the [PTZ SETUP 1▶] menu, press the ▶▶ button (see p.15).
② Press the 1 button to move to the Model Setup screen.
PTZ SETUP 2
1:MODEL 2:TRACE
3:AF
Press Numeric Key
+,-:Model Change
PTZ MODEL SETUP
PTZ ID: 0 [ 0 ]
MODEL:NONE
+,-:Model Change
PTZ MODEL SETUP
PTZ ID: 1 [ 1 ]
MODEL: SPD
③ Press a number in the number pad to set the PTZ camera ID.
The camera model type saved in EEPROM is displayed on the LCD monitor when changing camera ID.
When
entering '1'
④ Press the + and - buttons on the number pad to change the camera type. SPD-1600/2200/2500, PELCO-D,
PANASONIC(WV-CS854A) and SAMSUNG ELECTRONICS (SCC-643) types can be selected.
⑤ Press the ENTER button to finish the setup.