Samsung SCC-3000 - Manual (Page 28)

《28》
Controller Mode
(4) DATA COPY
■ This menu is for copying master controller menu data to a sub-controller.
The controller ID value is not copied.
① At the [Controller SETUP 1▶] menu, press the 3 button (see p.26).
② Press a number on the number pad to enter the ID number for the sub-
controller where the data will be copied.
③ Press the ENTER button to set the controller ID.
④ Press the 1 button to start coping data.
Press the 2 button to return to the previous menu.
CONTROLLER SETUP1
1:CONTROLLER ID
2:SERIAL 3:COPY
Press Numeric Key
Enter:ID Set <2-16>
DATA COPY
SUB-CONTROL ID? [ 0 ]
Press Numeric Key
DATA COPY
Do you want to COPY?
1:YES 2:NO SUB-ID: 2
Press Numeric Key
DATA COPY
Wait a Minute
DATA COPYING SUCCESS
⑤ The [DATA COPYING SUCCESS] message appears when data copying is complete.
The [DATA COPYING FAIL] message appears if data copying failed.
▤ Data copy takes approximately 7~10 seconds.
This menu is available only for the master controller (ID: 1).
[DATA COPY SUCCESSFUL]
Press Numeric Key
DATA COPY
Wait a Minute
DATA COPYING FAIL
[DATA COPY FAILURE]