Windows, Windows nt 4.0 – SysKonnect SK-9E21D User Manual
Page 18
20
3 Installation of the Driver Software
Windows
SysKonnect offers drivers for Windows NT 4.0, Windows 98 SE, Windows Me,
Windows 2000, Windows XP and Windows Server 2003. Additionally, a value added package
is available for Windows 2000, Windows XP and Windows Server 2003 enabling Virtual LAN
(VLAN) and Link Aggregation support. This package also includes a utility program for easy
installation and configuration. For details, refer to chapter "SysKonnect Network Driver Instal-
lation Packages for Windows 2000, Windows XP and Windows Server 2003".
Drivers downloaded from our web site are available in a packed format (.zip files). The down-
loaded file has to be unpacked before installation.
Windows NT 4.0
The NDIS 4.0 32-bit Miniport driver for the SysKonnect SK-9E21D 10/100/1000Base-T
Adapter, PCI Express, supports Windows NT 4.0. This driver does not support
Windows NT 3.51 or below. It is recommended to install the latest Windows NT 4.0 Service
Pack after successful installation of the driver.
To install the driver, proceed as follows:
1.
After you have installed the adapter in your computer (for details, see chapter 1 "Installa-
tion of the Network Adapter"), boot Windows NT 4.0.
2.
Select S
TART
> S
ETTINGS
> C
ONTROL
P
ANEL
.
The window “Control Panel“ is displayed.
3.
Select N
ETWORK
.
The window “Network“ is displayed.
4.
Select the tab A
DAPTERS
.
5.
Click A
DD
....
6.
Click H
AVE
D
ISK
....
7.
Depending on the type of installation medium used (CD-ROM, floppy disk, network
drive), type the path to the driver, e.g.
e:\SK-9E21D\Windows\Nt4
, where ”e” is the
designation of the CD-ROM drive on your system.
8.
Click O
K
.
The window “Select Network Adapter“ is displayed.
9.
Select the adapter for which the driver is to be installed.
10. Click O
K
.
The window “Card Setup“ is displayed.
11. Configure the adapter (for details, refer to the corresponding readme file).
12. When you have finished the configuration, click O
K
.
13. After successful installation of the driver, install the latest Windows NT 4.0 Service Pack.
14. Restart your system.
For more information, refer to the corresponding readme file.