SysKonnect SK-9E21D - Manual (Page 39)

SysKonnect SK-9E21D 10/100/1000Base-T Adapter PCI Express
Technical Specifications 41
Technical Specifications
Network interface
standard IEEE 802.3 and IEEE 802.3u (Ethernet and Fast Ethernet)
IEEE 802.3ab and IEEE 802.3z (Gigabit Ethernet)
IEEE 802.3x (Flow-control and Auto-negotiation)
IEEE 802.1p (Quality of Services)
IEEE 802.1q and IEEE 802.3ac (VLAN and VLAN tagging)
IEEE 802.3ad (Link Aggregation)
RAM 48 kByte RAM on-chip buffer
SPI Flash Memory 256 kByte
Serial EEPROM Maximum size: 1 kByte
256 bytes can be used for VPD (read-only and writable section)
PCI Express PCI Express 1.0a compliant
x1 PCI Express Serial Link
(adapter can also be operated in x4, x8 and x16 slots)
Power manage-
ment Advanced Power Management according to PCI Bus Power Man-
agement Interface Specification, Revision 1.1 or later and Network
Device Class Power Management Reference Specification V2.0
PCI Express
Native Hot-Plug Hot-Plug Support according to PCI Express 1.0a and Advanced
Configuration and Power Interface Specification Revision V2.0
ASF Functionality SMBus 2.0 master interface for ASF functionality
Serial Peripheral Interface for ASF firmware
Safety standards Europe: EN60950 – IEC 60950 – VDE 0805
USA / Canada: cULus listed accessory (UL 60950, CSA C22.2)
International: CB certification
Approved use The SysKonnect SK-9E21D 10/100/1000Base-T Adapter, PCI Ex-
press, is for use in a compatible Listed Personal Computer that has
Installation Instructions detailing user installation of card cage ac-
cessories.
EMC standards Europe: EN55022; IEC – CISPR-22 Class B
EN 55024; IEC – CISPR-24
USA: FCC, CFR 47 Part 15, Declaration of Conformity Class B
Power consump-
tion @ +3.3V / VCC: max. 2.3 W
@ +3.3V(aux): max. 375 mA
Dimensions (max.) 86.36 mm x 55.32 mm
Temperature range Operation: 0°C to + 50°C
Storage: -20°C to + 70°C
Relative humidity Operation: 30% to 80% non-condensing
Storage: 10% to 95% non-condensing
Warranty 5 years