SysKonnect SK-9E21D - Manual (Page 20)

22 3 Installation of the Driver Software
7. Type the path to the driver, e.g.
e:\SK-9E21D\Windows\WinME
, where ”e” is the des-
ignation of the CD-ROM drive on your system.
8. Click N EXT .
The window “Location of driver” is displayed.
9. Click N EXT to continue the installation.
The menu “Windows has finished installing the new hardware device” is displayed.
10. Click F INISH .
11. Restart your computer.
For more information, refer to the corresponding readme file.
Windows 2000
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9E21D 10/100/
1000Base-T Adapter, PCI Express, supporting Windows 2000. SysKonnect also offers the
“Network Driver Installation Package for Windows 2000, Windows XP and Windows
Server 2003”. For details on this package, refer to chapter "SysKonnect Network Driver In-
stallation Packages for Windows 2000, Windows XP and Windows Server 2003".
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 "Installa-
tion of the Network Adapter"), boot Windows 2000.
Windows 2000 detects the SysKonnect SK-9E21D Adapter as “Ethernet Controller” dur-
ing the boot operation.
The window „Found New Hardware Wizard“ is displayed.
2. Click N EXT .
In the same window the menu „Install Hardware Device Drivers“ is displayed.
3. Select the check box S EARCH FOR A SUITABLE DRIVER FOR MY DEVICE ( RECOMMENDED ).
4. Click N EXT .
The menu “Locate Driver Files” is displayed.
5. Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard
disk).
6. Type the path to the driver, e.g.
e:\SK-9E21D\Windows\Win2000
, where ”e” is the
designation of the CD-ROM drive on your system.
7. Click O K .
8. Click N EXT .
The menu “Driver Files Search Results” is displayed, listing the found driver and its loca-
tion.
9. To install the driver, click N EXT .
In case the driver does not have a Microsoft Digital Signature yet, the window “Digital
Signature Not Found” is displayed.
10. To continue the installation, click YES .
The window ”Completing the Found New Hardware Wizard” is displayed.
11. Click F INISH to complete the installation.
For more information, refer to the corresponding readme files.
Windows XP and Windows Server 2003
SysKonnect offers an NDIS 5.1 32-bit Miniport driver for the SysKonnect SK-9E21D 10/100/
1000Base-T Adapter, PCI Express, supporting Windows XP and Windows Server 2003.
SysKonnect also offers the “Network Driver Installation Package for Windows 2000,
Windows XP and Windows Server 2003”. For details on this package, refer to chapter