SysKonnect SK-9E21D - Manual (Page 21)

SysKonnect SK-9E21D 10/100/1000Base-T Adapter PCI Express
Windows 23
"SysKonnect Network Driver Installation Packages for Windows 2000, Windows XP and Win-
dows Server 2003".
The installation procedure for Windows XP and Windows Server 2003 is identical. It is de-
scribed for Windows XP.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 "Installa-
tion of the Network Adapter"), boot Windows XP.
Windows XP detects the SysKonnect SK-9E21D Adapter as “Ethernet Controller” during
the boot operation.
The window “Found New Hardware Wizard“ is displayed.
2. Select the check box I NSTALL FROM A LIST OR SPECIFIC LOCATION (A DVANCED ).
3. Click N EXT .
The menu “Please choose your search and installation options“ is displayed.
4. Select the check box S EARCH FOR THE BEST DRIVER IN THESE LOCATIONS .
5. Select the check box I NCLUDE THIS LOCATION IN THE SEARCH .
6. Type the path to the driver, e.g.
e:\SK-9E21D\Windows\WinXP,
where ”e” is the des-
ignation of the CD-ROM drive on your system.
7. Click O K .
8. Click N EXT .
In case the adapter has not passed Windows Logo testing to verify its compatibility with
Windows XP, the window “Hardware Installation” is displayed.
9. To continue the installation, click C ONTINUE A NYWAY .
In the window ”Found New Hardware Wizard”, the menu “Completing the Found New
Hardware Wizard” is displayed.
10. Click F INISH to complete the installation.
For more information, refer to the corresponding readme file.
SysKonnect Network Driver Installation Packages for
Windows 2000, Windows XP and Windows Server 2003
There are two SysKonnect Network Driver Installation Packages for the SysKonnect SK-
9E21D 10/100/1000Base-T Adapter, PCI Express, containing the NDIS 5.0 and 5.1 32-bit
Miniport drivers, the Virtual LAN (VLAN) intermediate driver, and the Link Aggregation
(LAGG) intermediate driver. These packages support Windows 2000, Windows XP and Win-
dows Server 2003. The installation process for these Windows versions is identical.
To install the package on Windows 2000, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 "Installa-
tion of the Network Adapter"), boot Windows 2000.
Windows 2000 detects the SysKonnect SK-9E21D Adapter as “Ethernet Controller” dur-
ing the boot operation.
The window “Found New Hardware Wizard“ is displayed.
2. Click C ANCEL to continue the package installation.
3. Go to the folder where the “SysKonnect Network Driver Installation Package” (setupsk-
net.exe) is stored.
4. Double-click SETUPSKNET . EXE to start the installation of the package.
The window “Welcome to the SysKonnect Network Installation Package Installation Wiz-
ard“ is displayed.
5. Click N EXT to continue the installation.
The window “License Agreement“ is displayed.
6. Select the check box I ACCEPT THE L ICENSE A GREEMENT .