Skype Digital Enhanced Cordless Communication - Manual (Page 12)

11
Press Left key and “ “ button consecutively to lock/unlock the keypad.
To Enter Base Settings Mode
1. Select Settings under menu mode;
2. Press left key select Base Settings and the display shows Ringer Settings, Dial
Settings, Call Barring, LCR(Optional), PIN and Default Settings.
To Set Base Volume
1. Select < Ringer Settings> under Base Settings mode;
2. Select <Ringer Volume> under Ringer Settings;
3. Press Left key and Scrolling button to set the volume you like;
4. Press Left key to confirm.
To Set Base Melody (1-9 melody)
1. Select < Ringer Settings> under Base Settings mode;
2. Select <Ringer Melody> under Ringer Settings;
3. Press Left key Scrolling button to set the melody you prefer;
4. Press Left key to confirm.
To Set Flash Time
You can change flash time to short or long.
1. Select < Dial Settings> under Base Settings mode;
2. Select <Flash Time> under Dial Settings;
3. Press Left key and Scrolling button to change Flash Time to Long or Short;
4. Press Left key to confirm
To Set Auto Pause
When you call a number with a pause, the phone waits a few seconds before
transmitting the next digits in the dialing sequence. This is useful when you have to dial
a number for access to an outside line, or for going into a voicemail system. You are
allowed to set one number in Auto Pause
1. Select < Dial Settings> under Base Settings mode;
2. Select <Auto Pause> under Dial Settings;
3. Press Left key, then key in PIN (default 0000)
4. Press Left key, then key in the number you want to set auto pause;
5. Press Left key to confirm.
To Set Dial Mode
You can change dial mode to TONE or PULSE dialing.
1. Select < Dial Settings> under Base Settings mode;
2. Select <Dial Mode> under Dial Settings;
3. Press Left key and Scrolling button to change dial mode as TONE or PULSE;
4. Press Left key to confirm.
Call Barring Function
Call barring enables you to restrict or bar certain types of calls from your phone.
To Set Call Barring Number
1. Select < Call Barring> under Base Settings mode;
2. Select <Barring Number> under Call Barring;
3. Press Left key, then key in the PIN (the default PIN is 0000);
The display shows the numbers from 1 to 5 (the maximum call barring
numbers you can set)
4. Press Left key and then key in the telephone number you want to set call
barring.
5. Press Left key to confirm.
To Delete Call Barring Number
1. See 1-3 step above, press the Scrolling button to select the call barring number
you want to delete;