Skype Digital Enhanced Cordless Communication - Manual (Page 8)

7
Making and Answering Calls
To Make an Ordinary Call
1. Enter the telephone number and press Call key to place call;
2. If you make a mistake, press Right key to delete incorrect digits, before you
press Call key.
To Answer an Ordinary Call
1. When the handset and base unit ring, press the Call key to answer call.
2. When the AUTO TALK is turned on, you can simply answer the call by lifting the
handset from the base unit (see AUTO TALK part).
To End a Call
Press End key to hang up.
To Dial a Number from Call Logs
1. Select <Missed Calls>, <Received Calls> or <Dialed Calls> under CALL LISTS mode;
2. Press Left key, the display shows these calls;
3. Select the telephone number you want to call, then press the Call key to make
call
To Redial a Call
In standby mode, press and hold the Call key to enter the dial list, and press the
Scrolling button to scroll through the number you want to dial, then press the Call key
to redial.
Earpiece Volume
During a call, you just press Scrolling button up/down to adjust the volume of the
earpiece (0-9 level).
To Mute the Mouthpiece
1. During a call, press Left key once to mute the mouthpiece;
2. While the mouthpiece is muted, you cannot press any number key to send digits
down the line;
3. Press Left key again to get back to the Call.
Call Waiting (SKYPE / PSTN)
DECT telephone has a Call Waiting feature that works with Caller ID service from your
telephone service operator. When you’re engaged on a PSTN ongoing call, if you receive
a second Skype call, your phone will use a call waiting signal to let you know another
call is ringing in. This way, you can switch between Skype and PSTN callers, hook down
Skype call or even make Skype conference call together.
To Hook down / up the Second Call (Skype Call)
1. When you already engaged on an ongoing call, if another Skype call is received,
press Right key to enter option menu;
2. Then press Scrolling button to select Hook up / Hook down;
3. Press Left key to confirm.
Note: In standby mode, press any button on keypad except “Talk” button to make
the backlight come on before enabling any function. (It means 1
st press to turn on
the backlight, 2 nd press to activate the function button. This is correct for all
buttons except for “Talk” button.)