What the symbols mean, Setting up your telephone – Skype Digital Enhanced Cordless Communication User Manual

Page 5

Advertising
background image

4

What the symbols mean

Batteries Charge Level

Whenever this shows ‘nearly empty’ (

), put the handset on the base unit to charge

the batteries. While the batteries are being charged, the level shown will keep changing.

Mute

Your handset's microphone is muted.

Signal Level

Shows the signal between the handset and base unit, and disappear when you are out of
range of the base unit.

Speakerphone

Your handset’s loudspeaker is on.

Lock

Your handset’s keypad is locked.

Setting up your telephone

Connection and conditions for use

You can connect your telephone to a direct exchange line (DEL), a line connected to a
local exchange, with its own phone number; to an extension socket connected to a DEL;
or to an extension on an approved compatible PBX. Do not connect the telephone as an
extension to a payphone.

How many phones can you connect?

The ringer equivalence numbers (RENs) of all instruments (phones, fax machines, etc.)
connected to an exchange line must not add up to more than 4, otherwise, one or more
of them may not ring and/or answer calls correctly. The telephone has a REN of 1, and
most other telephones have a REN of 1unless marked otherwise.

Radio signals between handset and base unit

To use your handset and base unit together, you must be able to establish a radio link
between them. Be aware that:

Sitting the base unit as high as possible will give better results, in a two-storey
house, the best position may be on the first-floor landing.

Any large metal object, like a fridge, a mirror or a filing cabinet, between the
handset and base unit may block the radio signal.

Other solid structures, like walls, may reduce the signal strength.

Choosing a site for the base unit

The base unit should be placed on a level surface, in a position where:

The mains adapter plug will reach a 230 V AC switched mains supply socket;
never try to lengthen the mains power cable.

The telephone cable will reach your telephone line socket or extension socket.

It is not close to another telephone, this can cause radio interference.

It is not close to a sink, bath or shower, or anywhere else where it might get
wet.

It is not close to other electrical equipment, fridges, washing machines,
microwave ovens, TVs, fluorescent lights, etc.

Advertising