Skype Digital Enhanced Cordless Communication - Manual (Page 13)

12
2. Then press Left key, the display shows the call barring number you set;
3. Press and hold Right key to clear the number;
4. Press Left key to confirm.
Least cost route (LCR) function (Optional)
With the LCR function, the phone will automatically replace a long number with a
comparative short number, to simplify the process of dialing a long number. For example,
if the user program to replace "00" with "1790900", then when he dials"006567417211",
then the phone will automatically replace the number to be dialed out as
"17909006567417211".
To Set LCR
1. Select <LCR> under Base Settings mode;
2. Press Left key, and key in the PIN;
3. Press Left key, then key in the SHORT number that you want to replace the long
number;
4. Press Left key to confirm, then key in the LONG number;
5. Press Left key to confirm.
To Change Base PIN
1. Select <PIN> under Base Settings mode;
2. Press Left key, and key in the original PIN (default PIN:0000) number;
3. Then press Left key to confirm, and key in New PIN;
4. Press Left key, then key in New PIN again;
5. Press Left key to confirm.
Default Settings
1. Select <Default settings> under Base Settings mode;
2. Press Left key, and key in the current PIN number;
3. Press Left key to confirm, you will hear a beep, then all features will return to
their default settings.
The following default settings are for your reference:
1. Reset Flash time to Long
2. Delete call barring number.
3. Reset master pin number to 0000.
4. Reset ringer melody and volume.
5. Dial mode reset to Tone.
6. Remove Auto Pause number.
7. Remove LCR (if available).
Registration
Your telephone is supplied with the handset and USB dongle already registered to the
base unit; you shouldn't need to register them. But if you've bought extra handset, you'll
need to register each one to your original base unit. Maximum another 3
handsets can be
registered to one base.
To Enter Registration Mode
1. Select Settings under menu mode;
2. Press Left key, select Registration and the display shows Select Base, Base Sub
and De-register.
To register a handset
1. Select Base Sub under Registration mode;
2. Press Left key again, you will see BASE 1; BASE 2; BASE 3; BASE 4;
3. Press Scrolling button to scroll through the base, and press Left key to select.
4. Press and hold the Handset locator button on the base unit for a while, until you
hear "beep" sound twice continuously then let go.
5. Handset will find the base, press Left button to confirm. Enter base PIN(Default:
0000), and press Left key to confirm.