Programmed messages – Samsung ITP-5112L User Manual
Page 46
39
2.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.
3.
If a message has been left at your keyset by a keyset in Auto Answer, you must
manually cancel the message after it has been returned.
PROGRAMMED MESSAGES
When you will be away from your phone for any length of time, you can leave a
programmed station message. Display stations calling you will see this message
and be informed of your status or follow your instructions.
•
Dial 48 plus any of the message codes (01–20) listed on the back of this user
guide.
•
To cancel any of these messages you might have selected, dial 48 plus 00.
•
Press TRANSFER to exit and store your selection.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button.
You can have multiple programmed message buttons (PMSG) and each one can
have a different message code:
•
Press any programmed message (PMSG) button. The message is set and the
PGM MSG button indicator will be lit steady. Press the button again to turn off
the programmed message and the indicator will go blank.
•
Pressing another programmed message (PMSG) button will turn the previous
one off and set a different programmed message.
5112l_guide.qxp 5/9/2006 9:19 AM Page 45