SP Studio Systems SP-12 - Manual (Page 15)

GETTING READY
© E-mu Systems, Inc. 1985 Page 15
Enhanced by The Emulator Archive 2002 www.emulatorarchive.com
1E ADJUSTING THE MIX
1. Press the TUNE-MIX-MULTI switch (towards the upper left corner of the
Performance module) until the MIX LED lights. The display graphically shows
the level of each drum in the selected bank.
2. Vary the slider above the corresponding Drum Play button to vary the level of
each individual drum. As soon as you move the slider, the graph in the
display will jump to its new position.
3. Note that MIX settings are not stored while in segment mode. If you come up
with a particularly good mix, you can save the mix as described in Section 1K.