SP Studio Systems SP-12 - Manual (Page 66)

SAVING YOUR DATA
© E-mu Systems, Inc. 1985 Page 66
Enhanced by The Emulator Archive 2002 www.emulatorarchive.com
5C HOOKING UP THE 1541 DISK DRIVE OR CASSETTE
1. Power off both the SP-12 and the 1541.
2. Patch the disk cable from the plug above the 1541’s fuse post to the SP-12’s
rear panel disk jack (see Fig. 5-4).
Fig. 5-4
3. Turn on the disk drive, and then turn on the SP-12.
4. To insert the disk in the drive, first make sure that the latch is in the open
position (see Fig. 5-5).
5. Next, insert a disk label side up with the labelled side going in last (see Fig. 5-
6).
Fig. 5-5 Fig. 5-6