Sierra Wireless 20070914 - Manual (Page 102)

Global Positioning System (GPS)
Rev 3.0B Feb.08 89
Figure 10-5: AceManager : PinPoint - *PPTCPPOLL
Note: Some Internet providers (including cellular) block ports below
1024.
Report Types
There are several report types available. For remote reports, set
*PPGPSR. For local reports, set *PPLATSR.
Figure 10-6: AceManager : PinPoint - *PPGPRSR
• 0 ‐ *MF, Legacy reports for use with ATS version 4 and
older.
• 11 ‐ Global Positioning System (GPS) data.
• 12 ‐ GPS data with the UTC time and date.
• 13 ‐ GPS with time and date and Radio Frequency data
from the antenna.
• D0 ‐ Xora reports.
• E0 ‐ NMEA GGA and VTG sentences.
• E1 ‐ NMEA GGA, RMC, and VTG sentences.
• F0 ‐ TAIP data
• F1 ‐ TAIP compact data
Tip: The PinPoint X can be configured to supply one type of report to
a remote host and a different report type locally through the serial port
at same time. However, there may be conflicts due to the local and
remote reporting being in different modes and not all features to both
modes may be available.