Sierra Wireless 20070914 - Manual (Page 49)

Configuring your PinPoint X
Rev 3.0B Feb.08 36
Using a Terminal Application
with AT Commands
You can access and configure your PinPoint X using a terminal
application such as Microsoft HyperTerminal, PuTTY, or
similar. The following directions are for HyperTerminal which
is part of a standard installation of Windows XP.
Start > All Programs > Accessories > Communications > HyperTer‐
minal
Figure 5-13: HyperTerminal
1. Choose a name and icon for your
connection.
a. Choose a name for your connection, such as PinPoint X
or Sierra Wireless AirLink Solutions. The name and icon
are only for your own reference so you can find the
connection at a later date.
Tip: If you want to have a connection saved for both local and
remote, it is recommended the connection name reflect the
connection type, i.e. PinPoint X local.
b. Select OK.