Using ip manager with your pinpoint x, Using ip manager with, Your pinpoint x – Sierra Wireless 20070914 User Manual
Page 92
IP Manager
Rev 3.0B Feb.08
79
Note: The fully qualified domain name of your PinPoint X will be a
subdomain of the domain used by the IP Manager server.
Using IP Manager with your
PinPoint X
To allow your Sierra Wireless AirLink modem to be addressed
by name, the modem needs to have a minimum of three
elements configured. You can also configure a second dynamic
server as a backup, secondary, or alternate server.
In AceManager, select Dynamic IP.
Figure 9-1: AceManager: Dynamic IP
•
*MODEMNAME : The name you want for the modem.
There are some restrictions listed below for the modem
name.
•
*DOMAIN : The domain name to be used by the modem.
This is the domain name of the server configured for
*IPMANAGER1.
•
*IPMANAGER1 : The IP address or domain name of the
dynamic DNS server which is running IP Manager.
•
*IPMANAGER2 : The secondary server for the domain.
While it is optional to have two servers configured, it is
highly recommended.
Tip: You can use a domain name instead of the IP address for your
IP Manager servers if you have DNS set up in your PinPoint X.
•
*IPMGRUPDATE1 and *IPMGRUPDATE2: How often,
in minutes, you want the address sent to IP Manager. If
this is set to zero, the modem will only send an update if