Stamina Products Orbital Rower 1215 - Manual (Page 10)

ASSEMBLY INSTRUCTIONS
10
STEP 7
Slide the SEAT(25) onto the CENTER BEAM(1). Insert the STOPPER BOLT(20) through the CENTER
BEAM(1) and lock in position by screwing on the STOPPER(19). Also, please verify that the other STOPPER
BOLT(20) and STOPPER(19) are assembled at the factory. Press the CENTER BEAM CAP(28) into the
back end of the CENTER BEAM(1).
STEP 8
Pry the METER(30) from the CONSOLE(31). Attach the CONSOLE(31) to the CENTER BEAM(1) with
ROUND HEAD SCREWS(M4x10mm)(48).
STEP 9
Install a AA battery into the METER(30), one battery included. See page 12 for detailed battery installation
instructions. Run the connection wire of the METER(30) through the square hole on the CONSOLE(31).
Place the METER(30) back into the CONSOLE(31). Plug the connection wire of the METER(30) into the
socket located at the front end of the CENTER BEAM(1).
(Assembled at the factory)