Stamina Products Orbital Rower 1215 - Manual (Page 13)

13
STORAGE
To store the 1215 Orbital Rower simply keep it in a clean dry place.
Fold The REAR SUPPORT(16) for easy storage, refer to page 11.
Grasp the Front and Rear Stabilizer to move the 1215 Orbital Rower. Do not use the Seat to move the
1215 Orbital Rower. The Seat will move and the Seat Carriage may pinch your hand or fingers.
To avoid damage to the electronics, remove the battery before storing the 1215 Orbital Rower for one
year or more. 1.
2.
3.
4.
MAINTENANCE
The safety and integrity designed into the 1215 Orbital Rower can only be maintained when the 1215
Orbital Rower is regularly examined for damage and wear. Special attention should be given to the following:
Pull on the HANDLEBARS(8, 9) and verify that the SHOCKS(14) provide tension. The SHOCKS(14)
should provide many years of use.
Clean the roller tracks in the CENTER BEAM(1) with an absorbent cloth.
Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately
(1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Verify that that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
Worn or damaged components shall be replaced immediately or the 1215 Orbital Rower removed from
service until repair is made.
Only Stamina Products supplied components shall be used to maintain/repair the 1215 Orbital Rower.
Keep your 1215 Orbital Rower clean by wiping with an absorbent cloth after use. 1.
2.
3.
4.
5.
6.
7.
8.