Stamina Products Orbital Rower 1215 - Manual (Page 8)

ASSEMBLY INSTRUCTIONS
8
NOTE: Lay your partially assembled 1215 Orbital Rower up side down to complete STEP 3 and 4.
STEP 3
Place the LEFT and RIGHT BASE FRAME(2, 3) onto the CENTER BEAM(1). Connect the LEFT and
RIGHT BASE FRAME(2, 3) together with the two MOUNTING BRACKETS(4), then secure with HEX
BOLTS(M8x1.25x16mm)(43) and LOCK WASHERS(M8)(55).
STEP 4
Attach the REAR SUPPORT(16) to the SUPPORT BRACKET(15) with HEX BOLT(M10x1.5x95mm)(46)
and NYLOCK NUT(M10x1.5)(52). Lock the REAR SUPPORT(16) in position by inserting the PULLING
PIN(17) through the holes in the SUPPORT BRACKET(15) and REAR SUPPORT(16).