Solid State Logic X-Logic Series - Manual (Page 18)

4.4.7 Show Version (ve)
Select Show Version by turning the D-Pot till the display shows ‘ve’.
Press the D-Pot to show the software version
in three blocks. As an example, software
version ‘V1.2/11’ will display in this sequence
before returning to display ‘ve’.
4.4.8 Set DIM Level (d1)
Select DIM Level by turning the D-Pot till the display shows ‘d1’.
Press the D-Pot to show the current DIM level. The level can be varied from –3dB (‘03’) to –30dB (‘30’).
Press the D-Pot once more to change the DIM level.
Page 14
X-Rack Owner’s Manual