Samsung SFT-503 - Manual (Page 12)

Reference
Connecting Your Equipment
7
DiSEqC 1.0 Connection
All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible.
This allows multiple antennas to be connected to the STB at the same time.
If you have two or more fixed antennas or LNBs then we recommend you use a
DiSEqC 1.0 switch.
Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector
of the DiSEqC switch.
Do the same for any other LNBs that you have.
Connect one end of a coaxial cable to the RF output connector of the
DiSEqC switch, connect the other end to the LNB IN socket on the STB.
DiSEqC 1.2 Connection
Please refer to page 20.
To the digital receiver, you can connect either a single satellite antenna directly or
LNB of multi-feed equipment.
Upgrade via personal computer
To maintain the STB up-to-date, it will be possible
to upgrade the software of the STB via STB and
personal computer.
New versions of the software may
include new or improved functions for the latest one.
If you want to download and upgrade the software via
personal computer, visit our homepage
(http : //stb.samsungcorp.com) to get more information
and the new software.
1. Go to the Homepage and check the latest software to upgrade.
2. Download the latest software of your STB model to your PC directory.
3. Connect a cable between the COM1 port of your PC and RS232 port of the STB.
4. After that connection, make sure the STB is in STANDBY status.
(Front panel displays )
5. Then, run the downloaded file by double click it on your PC.
6. Then, power on STB by pressing the power button of front panel or by pressing the
power button of RCU
user's 4/9/01 3:24 PM Page 12