Sanyo CLT-J30 - Manual (Page 24)

24
1. Carefully remove the existing handset cover by prying up the notch
at the bottom of the cover.
2. Reattach new cover by snapping the upper portion of the cover into
position first, and then snap the lower portion into the place.
** Optional face plates can be bought separately, please visit our web
site www.sanyocanada.com for details.
NICKEL-METAL HYDRIDE BATTERIES MUST BE
DISPOSED OF PROPERLY.
Please take your used battery pack to a store that
recycles Ni-MH batteries.
When power is off, you will not be able to make or receive calls with the
telephone.
After a power outage, place the handset in the base for about 20 seconds
to reset the digital security code.
CHANGING THE FACE PLATES
RECYCLING NICKEL-METAL HYDRIDE BATTERIES
POWER FAILURE