Smeg DRY63CS - Manual (Page 13)

129530
129530
Only MENU functions available for a particular
program are displayed. When the preferred
additional function is selected, the display indicates
relevant symbol. After the appliance is switched off,
all additional functions, except the sound signal and
child lock, are reset to their original settings.
Delayed start
Default setting does not include delayed start
(display indicates 00:00 hours). Use button C to
select between 0 and 20 hours. For the first two
hours the sequence may be set at 30 minute
lapses, after that the sequence is 1 hour. When the
preset time elapses, the selected program starts. In
case of power failure prior the end of the countdown
(display flashes POWER FAILURE), press button D
(START).
Reduced temperature
This function is selected if you wish to dry laundry
at lower temperature than the program default (see
Program Chart). By selecting this function the drying
time is longer.
Certain programs do not allow selection of this
function.
After drying is completed, this function
returns to the initial higher temperature.
Anti-crease program
The anti-crease program is set at 1 hour by default.
You may also select either to switch off the program
(0 h) or prolong the program to last 2 hours (2 h).
The anti crease program is stopped if you open the
door of the appliance during the program, or if you
switch the appliance off.
Heater off
Heater may be switched off if you wish to dry laundry
at room temperature; drying time is extended.
12 13