Smeg DRY63CS - Manual (Page 18)

129530
129530
Door opened
If the door is opened during the drying process this
will pause the operation; the display reads DOOR
OPEN.
When the door is closed, the drying process
resumes only after the (D) START/PAUSE button
(D) is pressed. The beep reminds you that the
drying process continues.
If you press the START/PAUSE button D when
the door is open, the display indicates the CLOSE
DOOR warning and sound signal beeps.
•
Power failure
After the power supply has been restored the
display intermittently reads POWER FAILURE.
To continue press the START (D) button and the
machine will continue from the point it had been
interrupted, all previous settings remain the same
as before the failure.
If you wish to change settings or originally
selected program, you can do it by simply
pressing MENU or turn the selector jog to the
desired program.
Confirm the selection by pressing START, and
continue as in normal setting procedure.
In case of power failure child lock is not
switched off (if it was active prior the
failure).
•
Water container is full
(condenser dryer only)
When the water container is full the drying
program is interrupted. Display reads
CONTAINER FULL and a beep is heard.
After emptying the water from the container,
resume drying by pressing the D button ( START/
PAUSE).
18 19