Smeg DRY63CS - Manual (Page 7)

129530
129530
•
Packaging materials are environmentally friendly:
they can either be recycled, safely disposed of or
destroyed without any threat to the environment.
•
To be able to do this effectively all materials are
marked accordingly.
Be careful not to damage cabinet of the
appliance with a sharp object when
removing the packaging.
Ventilation slots and openings on the appliance
front and rear wall should not be obstructed.
A - Evacuation dryer
•
Place the appliance in a well ventilated room with
a window or a built-in fan.
•
Connect the evacuation tube to the pre-prepared
opening.
•
Evacuation must not be connected to air duct
used as a chimney for exhaust gasses of
appliances using other combustion material.
B - Condenser dryer
•
Do not place the appliance in a room where there
is danger of freezing.
•
Location should be adequately ventilated. Room
temperature should always be between 0°C and
25°C since frozen water in the condensation
water receptacle or in the pump may damage the
dryer.
•
Appliance can either stand on its own or can
be placed on top of a washing machine of the
same dimensions - minimum width 517 mm,
depth 476 mm. The surface for placing the dryer
must be clean and flat. Use supplied vacuum
feet to prevent sliding of the appliance. Washing
machine hardtop must be wooden or metallic. To
conceal the opening between the two appliances,
decorative plate is available on request against
payment.
6 7
Installation and connection
Removing wrapping
Selecting the
appropriate location of
the appliance
Installation