Smeg DRY63CS - Manual (Page 17)

129530
129530
EXAMPLE: Selected program: cotton, slightly
moist, functions selected: delayed start, decreased
temperature, child lock, no sound signal).
- End of drying procedure
At the end of the drying procedure the display
indicates END and CLEAN FILTER, and the beep is
heard.
In case of condenser dryer the display intermittently
flashes CLEAN FILTER - EMPTY CONTAINER.
If the appliance is not switched off and/or the door
is not opened, the anti-crease program switches
on (according to settings from cf. Selection of
additional functions) and the dryer continues with
gentle tumbling.
Pull the power lead from the socket and cut the
power supply from the mains.
•
By the user
Changing the program or the functions
After drying be careful when extracting
laundry from the appliance, as it may be
hot!
Prior any changes child lock must be
deactivated!
By pressing button D (START/ PAUSE) the drying
program is paused; display reads PAUSE.
You can now change additional settings or basic
programs.
Press MENU to enter any menu and change
additional settings or select another drying program.
Confirm by pressing D ( START/PAUSE).
You can switch the appliance off (turn jog A to the
position “0”) and reset all preferred settings.
16 17
Interruptions