Smeg DRY63CS - Manual (Page 14)

129530
129530
Quick program does not allow turning the heater off.
Child protection
Operation of the dryer may be protected against
accidental changes of programs or functions. The
function is activated by pressing the START button.
By pressing any key the sound alarm signals that
child lock is on. Relevant symbol flashes, and the
display reads CHILD LOCK ON.
If you want to set new drying program, or change
additional settings, you must first remove the
protection.
Switching the function off:
- during drying:
If you want to interrupt the program or change
settings, switch off the function temporarily by
keeping the B button (MENU) pressed for 4
seconds. During this time the program can be
stopped by pressing D button (see cf. Interruptions).
Relevant symbol flashes on the display. The
function is reactivated by pressing the D button
(START).
In case you fail to change anything within 15
seconds, the protection is automatically reactivated.
Even if you stop drying by opening the door
and child lock is temporarily switched off, it is
automatically restarted if the door is closed within
the next 15 seconds.
If you switch off the protection in the menu during
the interruption, it will no longer be active when the
program continues.
- after drying is completed:
By pressing the B button (MENU) for four seconds
after the drying program is completed, the
protection is switched off permanently. This means
that it will remain inactive also the next time you
start the drying procedure. Otherwise the protection
remains active till the next drying process. It is
switched off by a four second pressing of B button
(MENU), while the A button is turned to position “0”,
14 15