Smeg DRY63CS User Manual

Page 9

Advertising
background image

129530

129530

The distance between the dryer and the

moist air outlet (vent shaft, window)

should not exceed 2 meters, otherwise

water can accumulate in the tube.

B - Condenser dryer

Moisture from laundry is extracted in the water

condensation device and is either collected in the

receptacle or discharged directly into the drain

(drain height should not exceed 800mm).

Display reads CONTAINER FULL and a beep is

heard when the water receptacle is full and should

be emptied, preferably after each drying cycle.

Use the power cord to connect the dryer to the

power supply via wall socket.

Rated voltage and other characteristics are

indicated on the name plate, located under the

door frame of the appliance.

The wall socket should always be within

reach. It has to be earthed according to the

standing regulations.

If the supply cable is damaged it should

only be replaced by a qualified technician.

8

9

Power connection

Advertising