Account limit setting, Key operator programs – Sharp AR-C250 User Manual
Page 18
16
Account Limit Setting
This program is used to set the maximum number of copies which can
be made against a registered account number.
When the “ACCOUNT LIMIT SETTING” key is pressed, the following
display will appear.
To set a limit
1.
Enter the account number to be limited.
2.
Enter the upper limit (max. 999,999) for the account.
●
The limit can be set for color copying and black/white copying
respectively.
●
If a limit for the account has been already set, the limit will be
displayed. Press the CLEAR (
C
) key before entering a new
upper limit.
●
0 can be set as the upper limit. If 0 is set, copying in the
specified mode (color or black/white) will be disabled against
the account.
●
To cancel a limit, press the CLEAR (
C
) key and proceed to
step 3 without entering a limit.
3.
Press the “ENTER” key.
4.
To limit other accounts, repeat steps 1 to 3. Press the
“OK” key to exit the program.
To set a limit for all accoounts
1.
Press the “ALL ACCOUNTS” key on the touch panel.
●
“ALL” will appear under “ACCOUNT NUMBER”.
2.
Enter the upper limit (max. 999,999) for all accounts.
●
To cancel the limit for all accounts, press the CLEAR (
C
) key
and proceed to step 3 without entering a limit.
3.
Press the “ENTER” key.
4.
Press the “OK” key to exit the program.
KEY OPERATOR PROGRAMS
ACCOUNT LIMIT SETTING
ALL ACCOUNTS
ENTER
INPUT ACCOUNT NUMBER TO BE LIMITED.
OK
ACCOUNT
NUMBER
COPY
MODE
COLOR
B/W
NUMBER OF
COPIES MADE
MAXIMUM
-----
KEY OPERATOR PROGRAMS