Sharp AR-C250 - Manual (Page 4)

2
KEY OPERATOR CODE NUMBER
Registering the key operator code number
1 Press the CUSTOM SETTINGS key.
2 Press the “KEY OPERATOR PROGRAMS” key on the
touch panel.
● The following display will appear.
3 Enter 0 five times using the 10-key pad.
● As each 0 is entered, the dashes in the display will change to
asterisks.
4 Press the “COPIER” key on the touch panel.
5 Press the “OTHER FUNCTION SETTINGS” key.
A key operator code number must be registered before a key operator
program can be used. The key operator must remember this number. Only
this registered number will allow access to the key operator programs.
1
4
7
AUDIT
CUSTOM
SETTINGS
1
2
CUSTOM SETTINGS
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
8/ 11 AUTO
EXIT
DISPLAY
CONTRAST KEY OPERATOR
PROGRAMS
KEY OPERATOR PROGRAMS EXIT
TOTAL COUNT
PROGRAM LIST
PRINTOUT
COPIER
KEY OPERATOR PROGRAMS
COPIER MODE
OTHER FUNCTION
SETTINGS
ENABLE/DISABLE
SETTINGS
TIMER SETTINGS
ACCOUNT CONTROL
OK
KEY OPERATOR PROGRAMS
ENTER KEY OPERATOR CODE.
EXIT
KEY OPERATOR CODE
- - - - -
4 5 6
7 8 9
0 P
C
CLEAR
PROGRAM AUDIT
CLEAR
ALL
S