Sharp AR-C250 - Manual (Page 35)

KEY OPERATOR ASSISTANCE CALL
When the copier is in need of service or care not usually performed
by general users, the copier will stop and one of the following
messages listed below will appear.
Message Remedy
CHECK STAPLER POSITION OR STAPLE JAM. See page 7-11 of the Operation Manual for staple jam
removal. If the trouble cannot be easily remedied, use key
operator program “DISABLING OF STAPLER” (page 29) to
prevent the use of the stapler.
Contact your authorized Sharp Service Center for service.
SORTER IS OUT OF SERVICE. Contact your authorized Sharp Service Center for service.
PRESS [CA] TO CANCEL JOB. (This message will appear when the optional staple sorter
(AR-SS2) malfunctions.)
DUPLEX SYSTEM IS OUT OF SERVICE. Use key operator program “DISABLING OF DUPLEX
COPYING” (page 28) to prevent the use of the optional
duplex system. Contact your authorized Sharp Service
Center for service.
THE DOCUMENT FEEDER IS OUT OF Use key operator program “DISABLING OF DOCUMENT
SERVICE. PRESS [CA] TO CANCEL JOB. FEEDER” (page 28) to prevent the use of the optional
document feeder. Contact your authorized Sharp Service
Center for service.
SELECTED PAPER TRAY IS OUT OF SERVICE. Contact your authorized Sharp Service Center for service.
PLEASE SELECT ANOTHER PAPER TRAY.
CALL FOR SERVICE. With this message, an alphanumeric code will appear to
CODE: - indicate a malfunction has occurred which cannot be
corrected by the key operator.
Contact your authorized Sharp Service Center for service.
Be sure to report the alphanumeric code information as
well. This will enable the Service Center to prepare to
correct the malfunction associated with the code.
33