Sharp FO-2970M - Manual (Page 58)

Sending a Fax by Automatic Dialing
56
4
Press the START key.
5
Return to Step 3 to clear another
number, or press the STOP key to
return to the date and time display.
Note: You cannot clear a number if it is used in a timer operation or is
included in a Group Key. First clear the number from the operation or
group, then clear the Rapid Key or Speed Dial number. To check where
the number is used, print out the Group List or the Timer List as
explained in Chapter 8.
Making changes
To make changes in a number previously stored, repeat the
programming procedure. Select the Rapid Key or Speed Dial number
for which you want to make changes in Step 3, and then change the
number and/or name when they appear in the display in Steps 4 and 6.
Step 3 or
Note: The fax machine uses a lithium battery to keep automatic dialing
numbers and other programmed data in memory when the power is
turned off. Battery power is consumed primarily when the power is off.
With the power kept continuously off, the life of the battery is about 5
years. If the battery dies, have your dealer or retailer replace it. Do not try
to replace it yourself.
2
Press 2 to select CLEAR.
3
Press the Rapid Key or enter the
Speed Dial number (press the number
keys) that you want to clear.
Example:
Speed Dial 01
2
0 1
START
STOP
all-fo2970.book Page 56 Monday, July 24, 2000 7:45 AM