Sharp FO-2970M - Manual (Page 71)

Using TEL Reception Mode
69
3. Rec
e
iv
in
g
D
o
c
u
ments
1
When the fax machine rings, pick up
the handset.
2
If you hear a fax tone, wait until the
display shows RECEIVING and then
replace the handset.
Using TEL Reception Mode
FAX TEL
A.M.
When the reception mode is set to TEL, you must answer all calls by
picking up the fax machine’s handset or an extension phone connected
to the same line.
Answering with the fax’s handset
Beep
To select TEL mode,
press the RECEPTION
MODE key until the arrow
in the display points to
TEL.
Note: If you have set the Fax Signal
Receive setting to NO, press the START
key to begin reception.
RECEIVING
RECEPTION
MODE
all-fo2970.book Page 69 Monday, July 24, 2000 7:45 AM